![background image](http://html.mh-extra.com/html/smc-networks/8126pl2-f/8126pl2-f_management-manual_1300686432.webp)
Command Line Interface
4-144
4
access-list ip
This command adds an IP access list and enters configuration mode for standard or
extended IP ACLs. Use the
no
form to remove the specified ACL.
Syntax
[
no
]
access-list ip
{
standard
|
extended
}
acl-name
•
standard
– Specifies an ACL that filters packets based on the source IP
address.
•
extended
– Specifies an ACL that filters packets based on the source or
destination IP address, and other more specific criteria.
•
acl-name
– Name of the ACL. (Maximum length: 16 characters, no spaces)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• When you create a new ACL or enter configuration mode for an existing ACL,
use the
permit
or
deny
command to add new rules to the bottom of the list.
To create an ACL, you must add at least one rule to the list.
• To remove a rule, use the
no permit
or
no deny
command followed by the
exact text of a previously configured rule.
• An ACL can contain up to 96 rules.
Example
Related Commands
permit, deny 4-145
ip access-group (4-148)
show ip access-list (4-148)
Console(config)#access-list ip standard david
Console(config-std-acl)#
Summary of Contents for 8126PL2-F
