![background image](http://html.mh-extra.com/html/smc-networks/8126pl2-f/8126pl2-f_management-manual_1300686344.webp)
Command Line Interface
4-56
4
Switch Cluster Commands
Switch Clustering is a method of grouping switches together to enable centralized
management through a single unit. Switches that support clustering can be grouped
together regardless of physical location or switch type, as long as they are
connected to the same local network.
Using Switch Clustering
• A switch cluster has a primary unit called the “Commander” which is used to
manage all other “Member” switches in the cluster. The management station uses
both Telnet and the web interface to communicate directly with the Commander
through its IP address, while the Commander manages Member switches using
the cluster’s “internal” IP addresses.
• Once a switch has been configured to be a cluster Commander, it automatically
discovers other cluster-enabled switches in the network. These “Candidate”
switches only become cluster Members when manually selected by the
administrator through the management station.
Note:
Cluster Member switches can be managed either through a Telnet connection to
the Commander, or through a web management connection to the Commander.
When using a console connection, from the Commander CLI prompt, use the
rcommand
(see page 4-59) to connect to the Member switch.
cluster
This command enables clustering on the switch. Use the
no
form to disable
clustering.
Syntax
[
no
]
cluster
Default Setting
Enabled
Command Mode
Global Configuration
Table 4-19 Switch Cluster Commands
Command
Function
Mode
Page
cluster
Configures clustering on the switch
GC
4-56
cluster commander
Configures the switch as a cluster Commander
GC
4-57
cluster ip-pool
Sets the cluster IP address pool for Members
GC
4-58
cluster member
Sets Candidate switches as cluster members
GC
4-58
rcommand
Provides configuration access to Member switches
GC
4-59
show cluster
Displays the switch clustering status
PE
4-59
show cluster members
Displays current cluster Members
PE
4-60
show cluster candidates Displays current cluster Candidates in the network
PE
4-60
Summary of Contents for 8126PL2-F
