System Management Commands
4-37
4
Command Usage
The
databits
command can be used to mask the high bit on input from
devices that generate 7 data bits with parity. If parity is being generated,
specify 7 data bits per character. If no parity is required, specify 8 data bits per
character.
Example
To specify 7 data bits, enter this command:
Related Commands
parity (4-37)
parity
This command defines the generation of a parity bit. Use the
no
form to restore the
default setting.
Syntax
parity
{
none
|
even
|
odd
}
no parity
•
none
- No parity
•
even
- Even parity
•
odd
- Odd parity
Default Setting
No parity
Command Mode
Line Configuration
Command Usage
Communication protocols provided by devices such as terminals and modems
often require a specific parity bit setting.
Example
To specify no parity, enter this command:
Console(config-line)#databits 7
Console(config-line)#
Console(config-line)#parity none
Console(config-line)#
Summary of Contents for 8126PL2-F
