![background image](http://html.mh-extra.com/html/smc-networks/8126pl2-f/8126pl2-f_management-manual_1300686161.webp)
Port Configuration
3-113
3
Configuration:
•
Name
– Interface label.
•
Port admin
– Shows if the interface is enabled or disabled (i.e., up or down).
•
Speed-duplex
– Shows the current speed and duplex mode. (Auto, or fixed choice)
•
Capabilities
– Specifies the capabilities to be advertised for a port during
auto-negotiation. (To access this item on the web, see "Configuring Interface
Connections" on page 3-114.) The following capabilities are supported.
-
10half
- Supports 10 Mbps half-duplex operation
-
10full
- Supports 10 Mbps full-duplex operation
-
100half
- Supports 100 Mbps half-duplex operation
-
100full
- Supports 100 Mbps full-duplex operation
-
1000full
- Supports 1000 Mbps full-duplex operation
-
Sym
- Transmits and receives pause frames for flow control
-
FC
- Supports flow control
•
Broadcast Storm
– Shows if broadcast storm control is enabled or disabled.
•
Broadcast Storm Limit
– Shows the broadcast storm threshold. (500-262143
packets per second)
•
Multicast Storm
– Shows if multicast storm control is enabled or disabled.
•
Multicast Storm Limit
– Shows the multicast storm threshold. (64 - 1,000,000
kilobits per second)
•
Unknown Unicast Storm
– Shows if unknown unicast storm control is enabled or
disabled.
•
Unknown Unicast Storm Limit
– Shows the unknown unicast storm threshold.
(64 - 1,000,000 kilobits per second)
•
Flow Control
– Shows if flow control is enabled or disabled.
•
LACP
– Shows if LACP is enabled or disabled.
•
Port Security
– Shows if port security is enabled or disabled.
•
Max MAC count
– Shows the maximum number of MAC address that can be
learned by a port. (0 - 1024 addresses)
•
Port Security Action
– Shows the response to take when a security violation is
detected. (shutdown, trap, trap-and-shutdown, or none)
•
Media Type
– Shows the forced or preferred port type to use for combination ports
21-24/45-48. (Display options: copper forced, SFP forced, SFP preferred auto)
Current Status:
•
Link Status
– Indicates if the link is up or down.
•
Port Operation Status
– Provides detailed information on port state.
(Displayed only when the link is up.)
•
Operation Speed-duplex
– Shows the current speed and duplex mode.
•
Flow Control Type
– Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)
Summary of Contents for 8126PL2-F
