![background image](http://html.mh-extra.com/html/smc-networks/8126pl2-f/8126pl2-f_management-manual_1300686081.webp)
Basic Configuration
3-33
3
CLI
– Enter the IP address of at least one SMTP server, set the syslog severity level
to trigger an email message, and specify the switch (source) and up to five recipient
(destination) email addresses. Enable SMTP with the
logging sendmail
command
to complete the configuration. Use the
show logging sendmail
command to display
the current SMTP configuration.
Renumbering the System
Web
– Click System, Renumber. Click the Renumber button to renumber the switch.
When prompted, confirm that you want to renumber the switch.
Figure 3-20 Renumbering the System
Console(config)#logging sendmail host 192.168.1.4
4-47
Console(config)#logging sendmail level 3
4-48
Console(config)#logging sendmail source-email
4-49
Console(config)#logging sendmail destination-email
4-49
Console(config)#logging sendmail
4-50
Console(config)#exit
Console#show logging sendmail
4-50
SMTP servers
-----------------------------------------------
1. 192.168.1.4
SMTP minimum severity level: 4
SMTP destination email addresses
-----------------------------------------------
1. [email protected]
SMTP source email address: [email protected]
SMTP status: Enabled
Console#
Summary of Contents for 8126PL2-F
