![background image](http://html.mh-extra.com/html/smc-networks/8126pl2-f/8126pl2-f_management-manual_1300686070.webp)
Configuring the Switch
3-22
3
CLI
– To download new firmware form a TFTP server, enter the IP address of the
TFTP server, select “opcode” as the file type, then enter the source and destination
file names. When the file has finished downloading, set the new file to start up the
system, and then restart the switch.
To start the new firmware, enter the “reload” command or reboot the system.
Saving or Restoring Configuration Settings
You can upload/download configuration settings to/from a TFTP server. The
configuration files can be later downloaded to restore the switch’s settings.
Command Attributes
•
File Transfer Method
– The configuration copy operation includes these options:
- file to file
– Copies a file within the switch directory, assigning it a new name.
- file to running-config
– Copies a file in the switch to the running configuration.
- file to startup-config
– Copies a file in the switch to the startup configuration.
- file to tftp
– Copies a file from the switch to a TFTP server.
- running-config to file
– Copies the running configuration to a file.
- running-config to startup-config
– Copies the running config to the startup config.
- running-config to tftp
– Copies the running configuration to a TFTP server.
- startup-config to file
– Copies the startup configuration to a file on the switch.
- startup-config to running-config
– Copies the startup config to the running config.
- startup-config to tftp
– Copies the startup configuration to a TFTP server.
- tftp to file
– Copies a file from a TFTP server to the switch.
- tftp to running-config
– Copies a file from a TFTP server to the running config.
- tftp to startup-config
– Copies a file from a TFTP server to the startup config.
•
TFTP Server IP Address
– The IP address of a TFTP server.
•
File Type
– Specify config (configuration) to copy configuration settings.
•
File Name
— The file name should not contain slashes (\ or /), the leading letter of
the file name should not be a period (.), and the maximum length for file names on
the TFTP server is 127 characters or 31 characters for files on the switch. (Valid
characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
Note:
The maximum number of user-defined configuration files is limited only by
available flash memory space.
Console#copy tftp file
4-25
TFTP server ip address: 192.168.1.23
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: ES4526RO-PoE-FLF-17V01
Destination file name: V10010.F
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#config
Console(config)#boot system opcode:V10010.F
4-30
Console(config)#exit
Console#reload
4-13
Summary of Contents for 8126PL2-F
