SMC Networks 8126PL2-F Management Manual Download Page 105

Page: 105 / 614

User Authentication

3-57

Command Attributes

•

Authentication

– Select the authentication, or authentication sequence required:

Local

– User authentication is performed only locally by the switch.

Radius

– User authentication is performed using a RADIUS server only.

TACACS

– User authentication is performed using a server only.

- [authentication sequence] – User authentication is performed by up to three

authentication methods in the indicated sequence.

•

RADIUS

Settings

Global

– Provides globally applicable RADIUS settings.

Server Index

– Specifies one of five RADIUS servers that may be configured.

The switch attempts authentication using the listed sequence of servers. The
process ends when a server either approves or denies access to a user.

Server Port Number

– Network (UDP) port of authentication server used for

authentication messages. (Range: 1-65535; Default: 1812)

Number of Server Transmits

– Number of times the switch tries to authenticate

logon access via the authentication server. (Range: 1-30; Default: 2)

Timeout for a Reply

– The number of seconds the switch waits for a reply from

the RADIUS server before it resends the request. (Range: 1-65535; Default: 5)

•

TACACS

Settings

Global

– Provides globally applicable settings.

Server Index

– Specifies the index number of the server to be configured. The

switch currently supports only one server.

Server Port Number

– Network (TCP) port of server used for

authentication messages. (Range: 1-65535; Default: 49)

Number of Server Transmits

– Number of times the switch tries to authenticate

logon access via the authentication server. (Range: 1-30; Default: 2)

Timeout for a Reply

– The number of seconds the switch waits for a reply from

the RADIUS server before it resends the request. (Range: 1-540; Default: 5)

Note:

The local switch user database has to be set up by manually entering user names
and passwords using the CLI. (See "username" on page 4-77)

Summary of Contents for 8126PL2-F







































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8126PL2-F

Reviews:

Related manuals for 8126PL2-F

Brands by name

Popular brands

SMC Networks 8126PL2-F, Management Manual

Search results

Summary of Contents for 8126PL2-F

Reviews:

Related manuals for 8126PL2-F

Brands by name

Popular brands