Command Line Interface
4-222
4
Configuring VLAN Interfaces
interface vlan
This command enters interface configuration mode for VLANs, which is used to
configure VLAN parameters for a physical interface.
Syntax
interface vlan
vlan-id
vlan-id
- ID of the configured VLAN. (Range: 1-4094, no leading zeroes)
Default Setting
None
Command Mode
Global Configuration
Example
The following example shows how to set the interface configuration mode to
VLAN 1, and then assign an IP address to the VLAN:
Related Commands
shutdown (4-160)
Table 4-69 Configuring VLAN Interfaces
Command
Function
Mode
Page
interface vlan
Enters interface configuration mode for a specified VLAN GC
4-222
switchport mode
Configures VLAN membership mode for an interface
IC
4-223
switchport
acceptable-frame-types
Configures frame types to be accepted by an interface
IC
4-224
switchport ingress-filtering
Enables ingress filtering on an interface
IC
4-224
switchport native vlan
Configures the PVID (native VLAN) of an interface
IC
4-225
switchport allowed vlan
Configures the VLANs associated with an interface
IC
4-226
switchport gvrp
Enables GVRP for an interface
IC
4-217
switchport forbidden vlan
Configures forbidden VLANs for an interface
IC
4-227
switchport priority default
Sets a port priority for incoming untagged frames
IC
4-245
Console(config)#interface vlan 1
Console(config-if)#ip address 192.168.1.254 255.255.255.0
Console(config-if)#
Summary of Contents for 8126PL2-F
