![background image](http://html.mh-extra.com/html/smc-networks/6128l2/6128l2_management-manual_1300638577.webp)
DHCP S
NOOPING
C
OMMANDS
4-277
Example
ip dhcp snooping database flash
This command writes all dynamically learned snooping entries to flash
memory.
Command Mode
Global Configuration
Command Usage
This command can be used to store the currently learned dynamic
DHCP snooping entries to flash memory. These entries will be restored
to the snooping table when the switch is reset. However, note that the
lease time shown for a dynamic entry that has been restored from flash
memory will no longer be valid.
Example
show ip dhcp snooping
This command shows the DHCP snooping configuration settings.
Command Mode
Privileged Exec
Console(config)#ip dhcp snooping information policy drop
Console(config)#
Console(config)#ip dhcp snooping database flash
Console(config)#
Summary of Contents for 6128L2
