![background image](http://html.mh-extra.com/html/smc-networks/6128l2/6128l2_management-manual_1300638450.webp)
C
OMMAND
L
INE
I
NTERFACE
4-150
Command Usage
This command allows you to disable a port due to abnormal behavior
(e.g., excessive collisions), and then reenable it after the problem has
been resolved. You may also want to disable a port for security reasons.
Example
The following example disables port 5.
clear counters
This command clears statistics on an interface.
Syntax
clear counters
interface
interface
•
ethernet
unit
/
port
-
unit
- Stack unit. (Always unit 1)
-
port
- Port number. (Range: 1-28)
•
port-channel
channel-id
(Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the
base value for displayed statistics to zero for the current management
session. However, if you log out and back into the management
interface, the statistics displayed will show the absolute value
accumulated since the last power reset.
Console(config)#interface ethernet 1/5
Console(config-if)#shutdown
Console(config-if)#
Summary of Contents for 6128L2
