![background image](http://html.mh-extra.com/html/smc-networks/6128l2/6128l2_management-manual_1300638555.webp)
M
ULTICAST
VLAN R
EGISTRATION
C
OMMANDS
4-255
Example
The following configures one source port and several receiver ports on the
switch, enables immediate leave on one of the receiver ports, and statically
assigns a multicast group to another receiver port:
show mvr
This command shows information about the global MVR configuration
settings when entered without any keywords, the interfaces attached to the
MVR VLAN using the
interface
keyword, or the multicast groups
assigned to the MVR VLAN using the
members
keyword.
Syntax
show mvr
[
interface
[
interface
]|
members
[
ip-address
]]
• interface
•
ethernet
unit/port
-
unit
- This is unit 1.
-
port
- Port number. (Range: 1-28)
•
port-channel
channel-id
(Range: 1-12)
• ip-address
- IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
Default Setting
Displays global configuration settings for MVR when no keywords are
used.
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/5
Console(config-if)#mvr type source
Console(config-if)#exit
Console(config)#interface ethernet 1/6
Console(config-if)#mvr type receiver
Console(config-if)#mvr immediate
Console(config-if)#exit
Console(config)#interface ethernet 1/7
Console(config-if)#mvr type receiver
Console(config-if)#mvr group 225.0.0.5
Console(config-if)#
Summary of Contents for 6128L2
