SMC Networks 6128L2, Management Manual

Page: 322 / 606

C
OMMAND
L
INE
I
NTERFACE
4-22
Default Setting
8 data bits per character
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input
from devices that generate 7 data bits with parity. If parity is being
generated, specify 7 data bits per character. If no parity is required,
specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Related Commands
parity (4-22)
parity
This command defines the generation of a parity bit. Use the no form to
restore the default setting.
Syntax
parity { none | even | odd }
no parity
• none - No parity
• even - Even parity
• odd - Odd parity
Default Setting
No parity
Command Mode
Line Configuration
Console(config-line)#databits 7
Console(config-line)#