SMC Networks 6128L2 Management Manual Download Page 252

Page: 252 / 606

ONFIGURING

THE

WITCH

3-198

•

Remove Class

– Removes the selected class.

Class Configuration

•

Class Name

– Name of the class map. (Range: 1-16 characters)

•

Type

– Only one match command is permitted per class map, so the

match-any field refers to the criteria specified by the lone match
command.

•

Description

– A brief description of a class map.

(Range: 1-64 characters)

•

Add

– Adds the specified class.

•

Back

– Returns to previous page without making any changes.

Match Class Settings

•

Class Name

– List of the class maps.

•

ACL List

– Name of an access control list. Any type of ACL can be

specified, including standard or extended IP ACLs and MAC ACLs.
(Range: 1-16 characters)

•

IP DSCP

– A DSCP value. (Range: 0-63)

•

IP Precedence

– An IP Precedence value. (Range: 0-7)

•

VLAN

– A VLAN. (Range:1-4094)

•

Add

– Adds specified criteria to the class. Up to 16 items are permitted

per class.

•

Remove

– Deletes the selected criteria from the class.

Web

– Click QoS, DiffServ, then click Add Class to create a new class, or

Edit Rules to change the rules of an existing class.

Summary of Contents for 6128L2































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6128L2

Reviews:

Related manuals for 6128L2

Brands by name

Popular brands

SMC Networks 6128L2, Management Manual

Search results

Summary of Contents for 6128L2

Reviews:

Related manuals for 6128L2

Brands by name

Popular brands