SMC Networks 6128L2, Management Manual

Page: 376 / 606

C
OMMAND
L
INE
I
NTERFACE
4-76
System Status Commands
show startup-config
This command displays the configuration file stored in non-volatile
memory that is used to start up the system.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.
• This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration
mode command, and corresponding commands. This command
displays the following information:
- SNMP community strings
- Users (names and access levels)
- VLAN database (VLAN ID, name and state)
- VLAN configuration settings for each interface
Table 4-23 System Status Commands
Command Function Mode Page
show
running-config Displays the configuration data currently in
use PE 4-77
show system Displays system information NE,
PE 4-80
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address
of Telnet clients NE,
PE 4-81
show version Displays version information for the system NE,
PE
4-81