![background image](http://html.mh-extra.com/html/smc-networks/6128l2/6128l2_management-manual_1300638526.webp)
C
OMMAND
L
INE
I
NTERFACE
4-226
Priority Commands
(Layer 3 and 4)
map ip dscp
(Global Configuration)
This command enables IP DSCP mapping (i.e., Differentiated Services
Code Point mapping). Use the
no
form to disable IP DSCP mapping.
Syntax
[
no
]
map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP DSCP, and default
switchport priority.
Example
The following example shows how to enable IP DSCP mapping globally.
Table 4-63 Priority Commands (Layer 3 and 4)
Command
Function
Mode Page
map ip dscp
Enables IP DSCP class of service
mapping
GC
4-226
map ip dscp
Maps IP DSCP value to a class of service IC
4-227
map access-list ip
Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
IC
4-120
show map ip dscp
Shows the IP DSCP map
PE
4-228
show map access-list
ip
Shows CoS value mapped to an access list
for an interface
PE
4-121
Console(config)#map ip dscp
Console(config)#
Summary of Contents for 6128L2
