![background image](http://html.mh-extra.com/html/smarteye/multi-netx/multi-netx_user-manual_1297396014.webp)
SMARTEYE
Netx Ethernet IP Control Unit User Manual
Page 8
Filename: netx IP Platform User Manual R0 .doc
…
In Control
A
M
7.2.3 S-netx Switches SW2, SW3, SW4, SW5 and SW6 – Not Used
Theses switches are either not used or set through software configuration only. Their settings on
the board are not recognized.
7.3
T-netx Switch and Jumper Diagram
7.3.1 T-netx Jumper Block J1 – Drain Termination
Jumper block J1 is located in the lower right-hand corner of the T-netx CPU/Reader
Interface board. This jumper block is used to select how the shield is terminated for each
of the three ports (two reader ports and auxiliary port). The factory defaults are shown.
Summary of Contents for Multi-netx
