manualshive.com logo in svg

Skyjack SJ-7027, Operating, Maintenance And Parts Manual

The Skyjack SJ-7027 is a versatile aerial work platform renowned for its outstanding performance and durability. Ensure seamless operation and longevity with our comprehensive Operating, Maintenance, and Parts Manual. Download this essential manual for free at manualshive.com and unlock the full potential of your Skyjack SJ-7027.

Share
Download
background image

SECTION 5, Page 7

SJ-600 Series Engine Powered

 

112715

June 2001

 

Warning

DO NOT

 

manually disengage the parking brakes if

the work platform is on a slope.

Later Models:

Figure 2-13A. Parking Brake Release Hand Pump and

Brake Valve Plunger (Machines With Serial Number

30167 and Above)

4 - 5.

Parking Brake Release Hand Pump (4) and

Brake Valve Plunger (5)

 - Located on the brake

manifold in the hydraulic electric side cabinet, this hand
operated pump MUST be used when pushing, towing
or winching the work platform.  To release the parking
brake:

1.

Make sure that the work platform is on level
ground.  Chock or block the wheels to keep work
platform from rolling.

2.

Turn Emergency Power Disconnect Switch to
“OFF” position.

3.

Depress the black plunger on the Brake Valve until
the plunger stays in.

4.

Grasp the red hand pump plunger and rapidly
depress 60 to 80 times until firm resistance is felt.
The brake is now released.

5.

Remove the wheel chocks or blocks, then push,
tow or winch the work platform to the desired
location. 

When pushing, towing or winching, 

DO

NOT

 exceed 2 mph (3.2 km/h). 

DO NOT

 push or

tow the platform onto a downward slope or pull
the platform down an incline towards the winch.

6.

Position machine on a firm and level surface.
Chock or block the wheels to prevent the platform
from rolling or re-engage the parking brake by
momentarily activating the drive function.

Note

The parking brake will reset automatically when the
work platform is put back into service.

Earlier Models:

Figure 2-13B. Parking Brake Release Hand Pump and

Quick Brake Valve  (Machines With Serial Number

30166 and Below)

6 - 7.

Parking Brake Release Hand Pump (6) and

Brake Valve Knob (7) - 

Located on the brake manifold in

the hydraulic electric side cabinet, this hand operated
pump MUST be used when pushing or winching the work
platform.  To release the parking brake:

1.

1.

Make sure that the work platform is on level

ground.  Chock or block the wheels to keep work
platform from rolling.

2.

Turn Emergency Power Disconnect Switch to
“OFF” position.

3.

Depress and turn the red knurled knob on the
quick brake valve counterclockwise to a fully
closed position.

4.

Grasp the red hand pump plunger and rapidly
depress 60 to 80 times until firm resistance is felt.
The brake is now released.

5.

Remove the wheel chocks or blocks, then push,
tow or winch the work platform to the desired
location. 

When pushing, towing or winching,

DO NOT 

exceed 2 mph (3.2 km/h). 

DO NOT

push or tow the platform onto a downward
slope or pull the platform down an incline
towards the winch.

6.

Position machine on a firm and level surface.
Chock or block the wheels to prevent the platform
from rolling.  Re-engage the parking brake. Open
the quick brake valve by depressing, then turning
the red knurled knob on the brake valve clockwise
to a fully open position.

   

     

Warning

The quick brake valve 

MUST

 be open to restore normal

operation.  

Failure to follow the procedure

discussed above could result in death or serious
injury!

4

5

7

6

Summary of Contents for SJ-7027

























































































































































































































Reviews:

No comments

Related manuals for SJ-7027

Terex Genie Z-34/22DC Operator'S Manual preview
Genie Z-34/22DC
Brand: Terex Pages: 56
Terex Genie Z-25J Operator'S Manual preview
Genie Z-25J
Brand: Terex Pages: 71
Terex Genie SX-105 XC Operator'S Manual preview
Genie SX-105 XC
Brand: Terex Pages: 76
Haulotte HA120PX Operator'S Manual preview
HA120PX
Brand: Haulotte Pages: 94

Brands by name

Popular brands

Load more brands