manualshive.com logo in svg

Skyjack SJ-7027, Operating, Maintenance And Parts Manual

The Skyjack SJ-7027 is a versatile aerial work platform renowned for its outstanding performance and durability. Ensure seamless operation and longevity with our comprehensive Operating, Maintenance, and Parts Manual. Download this essential manual for free at manualshive.com and unlock the full potential of your Skyjack SJ-7027.

Share
Download
background image

SECTION 4, Page 9

SJ-600 Series Engine Powered  

112715

June 2001

ELECTRICAL SYSTEM

TROUBLESHOOTING INFORMATION

TROUBLE

PROBABLE CAUSE

REMEDY

3. Loose or broken wire #16 joystick

controller (S7) to platform terminal

block.

4. Loose or broken wire #16 from

platform terminal block to relay

(16CR).

5. Defective relay (16CR).

6. Loose or broken wire #02 from relay

(16CR) to base terminal block.

7. Loose or broken wire #04 from base

terminal block to relay (16CR).

8. Loose or broken wire #16A from

relay (16CR) to time delay relay

(1TD).

9. Defective time delay relay (1TD).

10. Loose or broken wire #16B from time

delay relay (1TD) to reverse valve coil

(4H16B).

11. Defective forward valve coil (4H16B).

12. Loose or broken wire #02 from

forward valve coil (4H16B) to base

terminal block.

13. Open diode (D16A-1) or (D16A-2).

1. Loose or broken wire #21 from base

terminal block to relay (17ACR).

2. Defective relay (17ACR).

3. Loose or broken wire #18A from

relay (17ACR) to small pump dump

valve solenoid.

4. Defective small pump dump valve

coil (2H18A).

5. Loose or broken wire #02 from small

pump dump solenoid (2H18A) to

base terminal block.

1. Defective second speed switch (S7-

1) in joystick controller (S7).

2. Defective joystick controller (S7).

3. Loose or broken wire #19 from

joystick controller (S7) to platform

terminal block.

4. Loose or broken wire #19 from

platform terminal block to relay

(35CR).

5. Defective relay (35CR).

6. Loose or broken wire #10A from

base terminal block to high drive/tilt

override limit switch (LS5).

7. Misadjusted or defective high drive/

tilt override limit switch (LS5).

8. Loose or broken wire #35 from high

drive/tilt override limit switch (LS5) to

base terminal block.

3. Check continuity.  Replace if

defective.

4. Check continuity.  Replace if

defective.

5. Check relay.  Replace if defective.

6. Check continuity.  Replace if

defective.

7. Check continuity.  Replace if

defective.

8. Check continuity.  Replace if

defective.

9. Check relay. Replace if defective.

10. Check continuity.  Replace if

defective.

11. Check coil. Replace if defective.

12. Check continuity.  Replace if

defective.

13. Check diodes.  Replace if defective.

1. Check continuity.  Replace if

defective.

2. Check relay. Replace if defective.

3. Check continuity.  Replace if

defective.

4. Check coil.  Replace if defective.

5. Check continuity.  Replace if

defective.

1. Check switch. Replace if defective.

2. Check joystick. Replace if defective.

3. Check continuity.  Replace if

defective.

4. Check continuity.  Replace if

defective.

5. Check relay.  Replace if defective.

6. Check continuity.  Replace if

defective.

7. Adjust switch. Replace if defective.

8. Check continuity.  Replace if

defective.

FORWARD DRIVE

INOPERATIVE

(Continued)

FORWARD DRIVE

SPEED AND STEERING

INOPERATIVE

SECOND DRIVE SPEED

INOPERATIVE

Summary of Contents for SJ-7027

























































































































































































































Reviews:

No comments

Related manuals for SJ-7027

Manitou 150 AETJ L Repair Manual preview
150 AETJ L
Brand: Manitou Pages: 286
Genie GTH-1048 Service Manual preview
GTH-1048
Brand: Genie Pages: 214
Genie S-40 TRAX Service Manual preview
S-40 TRAX
Brand: Genie Pages: 325
Skyjack SJ 7127 Operating Manual preview
SJ 7127
Brand: Skyjack Pages: 84
JLG G6-42A Replacement Instructions preview
G6-42A
Brand: JLG Pages: 4
Haulotte HA12CJ Operator'S Manual preview
HA12CJ
Brand: Haulotte Pages: 106
JLG AM-19 Operators And Safety Manual Service & Maintenance Manual Illustrated Parts Manual preview
AM-19
Brand: JLG Pages: 143

Brands by name

Popular brands

Load more brands