manualshive.com logo in svg

Skyjack SJ-7027, Operating, Maintenance And Parts Manual

The Skyjack SJ-7027 is a versatile aerial work platform renowned for its outstanding performance and durability. Ensure seamless operation and longevity with our comprehensive Operating, Maintenance, and Parts Manual. Download this essential manual for free at manualshive.com and unlock the full potential of your Skyjack SJ-7027.

Share
Download
background image

SECTION 2, Page 12

SJ-600 Series Engine Powered

June 2001

Later Models:

Figure 2-14A. Parking Brake Release Hand Pump and

Brake Valve Plunger (Machines With Serial Number

30167 and Above)

4 - 5. Parking Brake Release Hand Pump(4) and
Brake Valve Plunger(5)

 - Located on the brake

manifold in the hydraulic electric side cabinet, this
hand operated pump 

MUST

 be used when pushing,

towing or winching the work platform.  To release the
parking brake:

1.

Make sure that the work platform is on level
ground.  Chock or block the wheels to keep
work platform from rolling.

2.

Turn Emergency Power Disconnect Switch to
“OFF” position.

3.

Depress the black plunger on the Brake Valve
until the plunger stays in.

4.

Grasp the red hand pump plunger and rapidly
depress 60 to 80 times until firm resistance is
felt.  The brake is now released.

5.

Remove the wheel chocks or blocks, then push,
tow or winch the work platform to the desired
location. 

When pushing, towing or winching,

DO NOT

 exceed 2 mph (3.2 km/h). 

DO NOT

 push

or tow the platform onto a downward slope or
pull the platform down an incline towards the
winch.

6.

Position machine on a firm and level surface.
Chock or block the wheels to prevent the
platform from rolling or re-engage the parking
brake by momentarily activating the drive
function.

Note

The parking brake will reset automatically when the
work platform is put back into service.

Earlier Models:

Figure 2-14B. Parking Brake Release Hand Pump

and Quick Brake Valve  (Machines With Serial

Number 30166 and Below)

6 - 7.

Parking Brake Release Hand Pump (6) and

Brake Valve Knob (7) - 

Located on the brake manifold

in the hydraulic electric side cabinet, this hand operated
pump 

MUST 

be used when pushing or winching the

work platform.  To release the parking brake:

1.

1. Make sure that the work platform is on level
ground.  Chock or block the wheels to keep
work platform from rolling.

2.

Turn Emergency Power Disconnect Switch to
“OFF” position.

3.

Depress and turn the red knurled knob on the
quick brake valve counterclockwise to a fully
closed position.

4.

Grasp the red hand pump plunger and rapidly
depress 60 to 80 times until firm resistance is
felt.  The brake is now released.

5.

Remove the wheel chocks or blocks, then push,
tow or winch the work platform to the desired
location. 

When pushing, towing or winching,

DO NOT 

exceed 2 mph (3.2 km/h).

 DO NOT

push or tow the platform onto a downward
slope or pull the platform down an incline
towards the winch.

6.

Position machine on a firm and level surface.
Chock or block the wheels to prevent the platform
from rolling.  Re-engage the parking brake. Open
the quick brake valve by depressing, then turning
the red knurled knob on the brake valve
clockwise to a fully open position.

   

     

Warning

The quick brake valve 

MUST

 be open to restore

normal operation.  

Failure to follow the procedure

discussed above could result in death or serious
injury!

5

4

7

6

Summary of Contents for SJ-7027

























































































































































































































Reviews:

No comments

Related manuals for SJ-7027

Snorkel M1230E Operator'S Manual preview
M1230E
Brand: Snorkel Pages: 20
BendPak 5175026 Service Manual preview
5175026
Brand: BendPak Pages: 29
MAHA TWIN F IV 3.0 A Original Operating Instructions preview
TWIN F IV 3.0 A
Brand: MAHA Pages: 28
MAHA RDSF III 3.0 Operating Instructions Manual preview
RDSF III 3.0
Brand: MAHA Pages: 30
MAHA Twin F 3.0 A Operation Manual preview
Twin F 3.0 A
Brand: MAHA Pages: 51
WERTHER INTERNATIONAL SATURNUS 50R Original Instructions Manual preview
SATURNUS 50R
Brand: WERTHER INTERNATIONAL Pages: 109
Haulotte HA120PX Operator'S Manual preview
HA120PX
Brand: Haulotte Pages: 94

Brands by name

Popular brands

Load more brands