manualshive.com logo in svg

Skyjack SJ-7027, Operating, Maintenance And Parts Manual

The Skyjack SJ-7027 is a versatile aerial work platform renowned for its outstanding performance and durability. Ensure seamless operation and longevity with our comprehensive Operating, Maintenance, and Parts Manual. Download this essential manual for free at manualshive.com and unlock the full potential of your Skyjack SJ-7027.

Share
Download
background image

SECTION 2, Page 2

SJ-600 Series Engine Powered

June 2001

Engine Control Panel (Dual Fuel)

Figure 2-4A. Engine Control Panel -

Ford Gasoline Engine

(Shown with Dual Fuel)

Engine Control Panel

 - This control station is

attached to the Engine Roll-out at the front of the base.
It contains the following controls:

1. Engine Off/On Switch

 - This plunger-type switch,

when pulled out, energizes the engine circuit and the
operator’s control box.  To stop engine, push plunger
in.

2. Fuel Select Switch

 (Machines with Dual Fuel) -

Used to switch from LP GAS to gasoline

3. Engine Start Push-Button

 - This push-button

switch energizes the engine starter motor.

4. Engine Choke Push-Button

 - This push-button

switch sets the choke for starting a cold gasoline/
propane engine.

Engine Control Panel (Diesel)

Figure 2-4B. Engine Control Panel -

Kubota Diesel Engine

Engine Control Panel

 - This control station is

attached to the Engine Roll-out at the front of the base.
It contains the following controls:

1. Engine Off/On Switch

 - This plunger-type switch,

when pulled out, energizes the engine circuit and the
operator’s control box.  To stop engine, push plunger
in.

2. Engine Start Push-Button

 - This push-button

switch energizes the engine starter motor.

3. Engine Glow Plug Push-Button

 - This push-

button switch energizes the glow plug to aid in starting
a cold diesel engine.

4

.

Glow Plug Indicator Light

 - This red lamp

illuminates until the glow plugs have completed their
timed heating cycle.  When the lamp goes out, the
engine is ready to be started.

3

4

1

2

3

4

1

2

Summary of Contents for SJ-7027

























































































































































































































Reviews:

No comments

Related manuals for SJ-7027

RANKO BAT R630 Operator'S Manual preview
BAT R630
Brand: RANKO Pages: 29
WERTHER INTERNATIONAL RPK25/B Instruction And Maintenance Manual preview
RPK25/B
Brand: WERTHER INTERNATIONAL Pages: 64
Genie Z45/25J Operator'S Manual preview
Z45/25J
Brand: Genie Pages: 38
Genie Z-80/60 Operator'S Manual preview
Z-80/60
Brand: Genie Pages: 65
Genie ZX-135/70 with Jib-Extend Operator'S Manual preview
ZX-135/70 with Jib-Extend
Brand: Genie Pages: 82
Genie Z-34/22IC Service Manual preview
Z-34/22IC
Brand: Genie Pages: 185
Genie Z-45/22 Service Manual preview
Z-45/22
Brand: Genie Pages: 205

Brands by name

Popular brands

Load more brands