manualshive.com logo in svg

Skyjack SJ-7027, Operating, Maintenance And Parts Manual

The Skyjack SJ-7027 is a versatile aerial work platform renowned for its outstanding performance and durability. Ensure seamless operation and longevity with our comprehensive Operating, Maintenance, and Parts Manual. Download this essential manual for free at manualshive.com and unlock the full potential of your Skyjack SJ-7027.

Share
Download
background image

SECTION 4, Page 7

SJ-600 Series Engine Powered

  112715

June 2001

ELECTRICAL SYSTEM

TROUBLESHOOTING INFORMATION

TROUBLE

PROBABLE CAUSE

REMEDY

4. Loose or broken wire #12 from

platform terminal block to joystick

controller (S7).

5. Loose or broken wire #10A from base

terminal block to relay (28CR).

6. Loose or broken wire #04 from relay

(28CR) to base terminal block.

7. Defective relay (28CR).

1. Loose or broken wire #30 from

diodes (D15A-2) and (D16A-2) to relay

(30CR).

2. Defective relay (30CR).

3. Loose or broken wire #02 from relay

(30CR) to base terminal block.

4. Loose or broken wire #10A from base

terminal block to relay (30CR).

5. Loose or broken wire #30A from relay

(30CR) to base terminal block.

6. Loose or broken wire #30A from base

terminal block to brake dump valve

(2H 30A-1) or brake feed valve (2H30A-

2).

7. Defective valve coil (2H30A-1) brake

dump or (2H30A-2) brake feed.

8. Loose or broken wire #02 from

(2H30A-1) brake dump or (2H30A-2)

brake feed coils to base terminal

block.

1. Defective steer right switch (S7-2) in

joystick controller (S7).

2. Loose or broken wire #23 from steer

right switch (S7-2) to platform terminal

block.

3. Loose or broken wire #23 from

platform terminal block to relay

(23CR).

4. Defective relay (23CR).

5. Loose or broken wire #04 from base

terminal block to relay (23CR).

6. Loose or broken wire #23A from

relay (23CR) to base terminal block.

7. Loose or broken wire #02 from  relay

(23CR) to base terminal block.

8. Loose or broken wire #23A from base

terminal block to steer right valve coil

(4H23A).

9. Defective steer right valve coil (4H23A).

10. Loose or broken wire #02 from steer

right valve coil (4H32A) to base

terminal block.

11. Open diode (D23A).

4. Check continuity.  Replace if

defective.

5. Check continuity.  Replace if

defective.

6. Check continuity.  Replace if

defective.

7. Check relay. Replace if defective.

1. Check continuity.  Replace if

defective.

2. Check  relay. Replace if defective.

3. Check continuity.  Replace if

defective.

4. Check continuity.  Replace if

defective.

5. Check continuity.  Replace if

defective.

6. Check continuity.  Replace if

defective.

7. Check coil. Replace if defective.

8. Check continuity.  Replace if

defective.

1. Check switch. Replace if defective.

2. Check continuity.  Replace if

defective.

3. Check continuity.  Replace if

defective.

4. Check relay. Replace if defective.

5. Check continuity.  Replace if

defective.

6. Check continuity.  Replace if

defective.

7. Check continuity.  Replace if

defective.

8. Check continuity.  Replace if

defective.

9. Check coil. Replace if defective.

10. Check continuity.  Replace if

defective.

11. Check diode.  Replace if defective.

DRIVE AND STEER

INOPERATIVE

(Continued)

BRAKES WILL NOT

RELEASE

STEER RIGHT

INOPERATIVE

Summary of Contents for SJ-7027

























































































































































































































Reviews:

No comments

Related manuals for SJ-7027

POP UP PUSH 10 PRO Operator'S Safety And Maintenance Handbook preview
PUSH 10 PRO
Brand: POP UP Pages: 20
Mec 45-AJ Diesel Operator'S Manual preview
45-AJ Diesel
Brand: Mec Pages: 48
Mec 3084ES Operator'S Manual preview
3084ES
Brand: Mec Pages: 56
Mec 45-J Diesel Service & Parts Manual preview
45-J Diesel
Brand: Mec Pages: 260

Brands by name

Popular brands

Load more brands