manualshive.com logo in svg

Skyjack SJ-7027, Operating, Maintenance And Parts Manual

The Skyjack SJ-7027 is a versatile aerial work platform renowned for its outstanding performance and durability. Ensure seamless operation and longevity with our comprehensive Operating, Maintenance, and Parts Manual. Download this essential manual for free at manualshive.com and unlock the full potential of your Skyjack SJ-7027.

Share
Download
background image

SECTION 4, Page 11

SJ-600 Series Engine Powered  

112715

June 2001

ELECTRICAL SYSTEM

TROUBLESHOOTING INFORMATION

TROUBLE

PROBABLE CAUSE

REMEDY

1. Loose or broken wire #12 from key

select switch (S3) to low/high range

switch (S29).

2. Defective low/high range switch

(S29).

3. Loose or broken wire #20B from low/

high range switch (S29) to low/high

torque switch (S41).

4. Defective low/high torque switch

(S41).

5. Loose or broken wire #20 from high/

low torque switch (S41) to relay (20CR).

6. Defective relay (20CR).

7. Loose or broken wire #02 from relay

(20CR) to base terminal block.

8. Loose or broken wire #04 from base

terminal block to relay (35CR).

9. Defective relay (35CR).

10. Loose or broken wire #44 from relay

(35CR) to relay (20CR).

11. Loose or broken wire #20A from

relay (20CR) to base terminal block.

12. Loose or broken wire #20A from

base terminal block to series parallel

valve coil (3H20A).

13. Defective series/parallel valve coil

(3H20A).

14. Loose or broken wire #02 from

series/parallel valve coil (3H20A) to

base terminal block.

1. Lift/off/drive switch (S3) in drive

position or defective.

2. Loose or broken wire #09 from off/

lift/drive switch (S3) to hydraulic

generator switch (S12) or lift enable

switch (S9).

3. Loose or broken wire #09A from

hydraulic generator switch (S12) to

lift enable switch (S9).

4. Defective hydraulic generator switch

(S12).

5. Defective lift enable switch (S9).

6. Loose or broken wire #09B from lift

enable switch (S9) to up/off/down

switch (S5).

7. Defective up/off/down switch (S5).

8. Loose or broken wire #14 from up/

off/down switch (S5) to diode (D14).

9. Diode (D14) open.

10. Loose or broken wire #14 from diode

(D14) to base terminal block.

11. Loose or broken wire #14 from base

terminal block to relay (14CR).

1. Check continuity.  Replace if

defective.

2. Check switch. Replace if defective.

3. Check continuity.  Replace if

defective.

4. Check switch.  Replace if defective.

5. Check continuity.  Replace if

defective.

6. Check relay.  Replace if defective.

7. Check continuity.  Replace if

defective.

8. Check continuity.  Replace if

defective.

9. Check relay.  Replace if defective.

10. Check continuity.  Replace if

defective.

11. Check continuity.  Replace if

defective.

12. Check continuity.  Replace if

defective.

13. Check coil. Replace if defective.

14. Check continuity.  Replace if

defective.

1. Select lift position. Check switch.

Replace if defective.

2. Check continuity.  Replace if

defective.

3. Check continuity.  Replace if

defective.

4. Check switch. Replace if defective.

5. Check switch.  Replace if defective.

6. Check continuity.  Replace if

defective.

7. Check switch. Replace if defective.

8. Check continuity.  Replace if

defective.

9. Check diode.  Replace if defective.

10. Check continuity.  Replace if

defective.

11. Check continuity.  Replace if

defective.

HIGH/LOW RANGE

SPEED INOPERATIVE

UP CIRCUIT

INOPERATIVE FROM

PLATFORM OR BASE

Summary of Contents for SJ-7027

























































































































































































































Reviews:

No comments

Related manuals for SJ-7027

Mec 6092RT Operator'S Manual preview
6092RT
Brand: Mec Pages: 44
Terex Genie Z-80/60 Operator'S Manual preview
Genie Z-80/60
Brand: Terex Pages: 80
EAE EE-65A.40T Installation, Operation, And Parts Manual preview
EE-65A.40T
Brand: EAE Pages: 37

Brands by name

Popular brands

Load more brands