SKF SMD 1B, Component Lifecycle Manual, Page: 60 / 114

Page 60
EN
Warning!
The applicable national environmen-
tal regulations and statutes are to
be adhered to when dismantling and
disposing the low meters.
Recyclability of the prefabricated parts
is given. See the Recycle assessment
The product can also be returned to
SKF Lubrication Systems Germany
GmbH for disposal, in which case the
customer is responsible for reimbursing
the costs incurred.
8.3 Dismantling and disposal
8. Shutdown/Disposal
8.1 Temporary shutdown
You can temporarily shut down the described
product by disconnecting the electrical, pneu-
matic, and/or hydraulic supply connections.
For more information, see the section 'General
information' in this instructions.
If you wish to shut down the product tempora-
rily, refer also to the instructions in the section
'Transport, delivery, and storage' of this ow-
ner’s manual.
When placing the product back into operation,
refer to the information in the sections
'Installation' and 'Startup’ of this owner’s
manual.
8.2 Permanent shutdown
All country specific legal guidelines and legislation
on the disposal of contaminated equipment
must be observed when shutting down the
product for the final time.
Caution!
Lubricants can contaminate the ground
and watercourses. Lubricants must be
used and disposed of properly. Country
speciic regulations and laws on the
use and disposal of lubricants must be
observed.
SKF Lubrication Systems Germany GmbH will
take back the product and arrange for its legal
disposal. Costs to the customer will be limited
to SKF's incurred costs.
8. Shutdown/Disposal