SKF SMD 1B, Component Lifecycle Manual, Page: 49 / 114

Page 49
EN
3. Transport, delivery, and storage
Warning!
The product must not be tilted or
dropped.
3. Transport, delivery, and storage
SKF Lubrication Systems Germany GmbH
products are packaged in accordance with
standard commercial practice according to the
regulations of the recipient's country and DIN
ISO 9001. During transport, safe handling
must be ensured and the product must be
protected from mechanical effects such as im-
pacts. The transport packaging must be
marked "Do not drop!".
There are no restrictions for land, air or sea
transport.
After receipt of the shipment, the product(s)
must be inspected for damage and for com-
pleteness according to the shipping documents.
The packaging material must be preserved until
any discrepancies are resolved.
SKF Lubrication Systems Germany GmbH prod-
ucts are subject to the following storage
conditions:
3.1 Lubrication units
Ambient conditions: dry and dust-free
surroundings, storage in well ventilated
dry area
Storage time: max. 24 months
Permissible humidity: < 65%
Storage temperature: 10 - 40°C
Light: avoid direct sun or UV exposure and
shield nearby sources of heat
3.2 Electronic and electrical devices
Ambient conditions: dry and dust-free
surroundings, storage in well ventilated
dry area
Storage time: max. 24 months
Permissible humidity: < 65%
Storage temperature: 10 - 40°C
Light: avoid direct sun or UV exposure and
shield nearby sources of heat
3.3 General notes
The product(s) can be enveloped in plas-
tic film to provide low-dust storage.
Protect against ground moisture by stor-
ing on a shelf or wooden pallet.
Bright-finished metallic surfaces, espe-
cially wearing parts and assembly surfac-
es, must be protected using long-term
anti-corrosive agents before storage.
At approx. 6-month intervals: Check for
corrosion. If there are signs of corrosion,
reapply anti-corrosive agents.
Drives must be protected from mechanical
damage.