3 Controls and functional elements
Sirona Dental Systems GmbH
3.2 General touchscreen functions
Operating Instructions ORTHOPHOS XG
Plus
DS/Ceph
59 87 594 D 3352
24
D 3352.201.01.18.02
Startup settings menu
Level 4
In level 4 you can modify any factory-programmed
startup parameters.
They are then displayed after the system is switched on
and for each new exposure.
You can reach the 4th level by touching the diskette sym-
bol (21) in the basic settings menu (level 3).
For PAN exposures you can change the abnormality
preference (2nd icon from the right, as per factory set-
ting) and the patient icon preference (2nd icon from the
left, as per factory setting).
For CEPH exposures you can only change the patient
icon preference (2nd icon from the left, as per factory
setting).
For TS exposures you can change the slice thickness
preference (left icon for the thinnest slice, as per factory
setting) and the patient icon preference (2nd icon from
the left, as per factory setting).
To change a preference, touch the corresponding icon
which is then indicated in orange and displayed in the
column (8).
Save the new preference by touching the programming
key.
You can close this menu again only by touching the blue
double arrow (9) in the upper right corner.
The display always returns to the standard menu
(program level 1).
NOTE
i
The icons framed with a broken line represent the factory
settings.
TS
TS
Select Start Settings
CEPH
CEPH
Select Start Settings
Select Start Settings
PAN
PAN
Select Start Settings
Select Start Settings
9
9
9
8
Summary of Contents for Orthophos XG Plus DS/Ceph
Page 1: ...b loqelmelp udm apL l f...
Page 127: ......
