Siqura C-60 E-MC, User Manual, Page: 98 / 142

Siqura C-60 E-MC
Page 92
10.5.1 Making Audio Connections
Transmitter and Receiver sections, two-way audio
Audio streams
The C-60 E-MC provides bidirectional audio. The C-60 E-MC can send three audio streams to
different destinations, multicast or unicast, to an A-80, or any C-/S-series codec with an audio
interface. It can also receive one audio stream from an A-80 or any C-/S-series codec that
features audio.
Highlighted fields
The source address and port number fields are highlighted in green when the enabled receiver
receives a stream from the specified source. The two fields are marked in red when no stream is
received with the receiver enabled and correctly configured.
Two-way audio
The figure above shows the setup for two-way audio on the side of the C-60 E-MC. The device on
the other side of the connection (with the IP address 172.22.250.131) would need similar
settings, that is - it must hold the IP address of the C-60 E-MC as the destination and source.
Transmitters and receivers must be enabled in order for streaming to start. Remember to
Save
a configuration to make it effective.