Siqura C-60 E-MC, User Manual, Page: 44 / 142

Siqura C-60 E-MC
Page 38
General Settings
Video impedance 75 Ohm or Hi-Z . Resistance to flow of signal current. With one video source on one
video input, select 75 Ohm . With a number of video inputs in parallel using one video
source, use Hi-Z on all inputs except the last.
Show Preview>> Click to view live images and see the effect of the current settings.
<<Hide Preview Hiding the preview may improve web page responsiveness.
Encoder Live View , Encoder 1 , Encoder, 2 , or H.264 1 . List displayed after clicking the Show
Preview>> button. Enables you to select a video encoder to handle the images seen
in the preview.
Volume Available in Encoder 1/2 and H.264 1 mode. Drag the sliding button to control audio
volume.
Mute Available in Encoder 1/2 and H.264 1 mode. Select or clear this box to mute or
unmute audio, respectively.
Contrast Drag the sliding button, or enter values into the boxes, to adjust current settings,
aided by the visual feedback from the preview. Settings entered here apply to all
video encoders.
Brightness
Color saturation
Hue
Sharpness
Default Restores the original values.
Encoder Priorities
Priority list
Each priority on the Encoder Priority list can be assigned once. The encoder with High (1) priority
consumes all CPU power it needs, leaving the remainder, if any, to the next in line. The encoder
with Medium (2) priority will show the same behavior, possibly leaving little or no CPU power to
the Low (3) priority encoder.
H.264 encoding uses a dedicated digital chip. Therefore, this encoder is not included in the
priorities list.
Important: To prevent Live View encoding (if used) from having the lowest priority, the highest
priority is best assigned to the Live View encoder, since this is a relatively light task compared to
the encoding tasks of Encoder 1 and Encoder 2.