Siqura C-60 E-MC, User Manual, Page: 67 / 142

Working with the Web Pages
Page 61
10.4.4 Live View tab
Video page, Live View tab
(M)JPEG output
The C-60 E-MC provides multiple (M)JPEG output methods.

To transport JPEG over HTTP and/or to use the Live View previews in the web pages, enable
the Live View encoder and configure its settings.

To enable and configure UDP /MJPEG streaming, go to the Encoder 1/2 tab, select MJPEG
encoding mode and configure settings.

To activate the uploading of JPEG images to an FTP server, configure the required settings
on the FTP Push tab and the Event Management page.
Encoder Settings
Enable All encoders can be enabled and configured separately.
Video bit rate mode Controls variations in bit rates.
Constant quality Keeps the image quality constant, with varying network
load. The quality is determined by the value set for the
Quality parameter (see below).
Constant bit rate Keeps network load constant at the cost of varying
image quality. Frames may be skipped.
Resolution Set sensible combinations of mode, resolution, frame rate and (maximum) bit rate. It
is advised to limit MJPEG encoding to 5 fps when the C-60 E-MC is also handling
MPEG-2/4 encoding with 1xD1 and 1xCIF or 2CIF at full frame rate.
Frame rate
(Maximum) bit rate
Actual bit rate Available in Constant quality mode (CQM). This field is dynamically updated with the
current bit rate to provide feedback on the bit rate that is used on average with the
current Quality setting (see below).
Quality Available in Constant quality mode CQM). Reflects the amount of compression.
Generally speaking: the higher the quality setting, the lower the compression ratio
and the more bits are consumed. This means a trade-off has to be found between the
desired quality level and available bandwidth.
Show Preview>> Click to view live images and see the effect of the current settings.
<<Hide Preview Hiding the preview may improve web page responsiveness.