©2021 Sintrol.
All rights reserved.
25 (104)
Revision 4
5
Mechanical installation
Read chapter “Safety” carefully before installing the device.
5.1
Unpacking and inspection
5.1.1
Unpacking
NOTICE
Improper handling during unpacking can damage the equipment.
When unpacking the device:
•
If you use a knife or scissors to open the package, be careful not to damage the device or its
parts.
•
Handle the device and its components with care when taking them out of the package.
•
Do not drop the device or subject it to blows.
5.1.2
Inspection
After unpacking the device:
•
Check that the device and all its standard and optional parts are included in the delivery.
•
Inspect the device and its individual parts for any defects, or damage that may have occurred
during delivery.
For instructions on how to return a damaged or defective device for repair or replacement, see section
5.2
Selecting installation location
Any information given in this user manual regarding the installation location or
suitability for a specific application does not replace careful functionality checks and
necessary approvals from an industry specialist.
Do not install the device close to large motors, cables carrying high voltages, or other
potential sources of interference. These can distort the measurement results.
