Simrad PI44
200
850-165085 / Rev.B
Navigation setup
Two
Navigation setup
dialogues may be accessed:
•
From the
Highway
display presentation
•
From the
Setup
menu
In both cases, settings are provided to set up the PI44
parameters related to the navigation display presentation. The
parameters defined for the
Highway
presentation are specific
for that presentation only. The
Navigation setup
choice on the
Setup
opens the
Pilot/Position setup
dialogue with parameters
valid for the entire PI44 operation.
Highway display presentation parameters
To access the parameters, press the
ADJ
(Adjust) or
ENT
button when you have the navigation display (”Highway”) in an
active window.
XTE distance:
Define how large crosstrack error the PI44 can
accept before the alarm is triggered.
Pilot/Position setup
These settings are used to set up the PI44 parameters related to
the navigation display presentations. To access the parameters,
press the
MENU
button to open the main menu. Select the
Setup
menu (4) and then
Pilot/Position Setup
(1).
Display position as:
Select how you wish the position data to
be displayed; LAT/LON (Latitude/Longitude), LORAN C or
DECCA.
Display speed as:
Select how you wish the speed information to
be displayed; SOG (speed over ground) or STW (speed through
water).
