References
203
850-165085 / Rev.B
Offset adjust
These settings are used to set up offset values for the
Depth
and
Spread
sensors.
To access the parameters, press the
MENU
button to open the
main menu. Then, open the
Setup
menu (4) and select
Sensor
alarm/calibration
(4). When the dialogue opens, press the
GAIN+
button four times to open the
Offset adjust
dialogue.
When accessed, this dialogue will only display the
Depth
and
Spread
sensors currently configured. Offset adjustments can be
only be made on the listed sensors. Enter a negative or positive
value to decrease or increase all readings from the chosen
sensor.
Related topics
→
How to define sensor offsets, page 66
→
PI Depth sensor, page 124
→
PS Depth sensor, page 129
→
PI Spread sensor, page 143
