Simrad PI44
232
850-165085 / Rev.B
ID
Use
Button/Function
4
Terminate communication
Click to disconnect the sensor from the PC.
5
Message field
Displays program and sensor data.
6
Communication channel
Select channel number to be uploaded to the sensor. If
a Twin Spread sensor is connected, two
communication channels must be defined.
7
LED control
Click and drag the slider bar to control the behaviour of
the sensor’s internal LED.
8
Ping control
Click and drag the slider bar to control how often ther
sensor will transmit (”ping”).
9
Sensor type
Displays the sensor type.
10
Data update rate
Select the time interval between data transmissions
from the sensor.
11
Remote
Only available for Twin Spread sensors, used to
defined the set of Remote sensors to be used in the
Twin Spread system.
Number
Only available for Remote sensors, used to define its
identification number (1 -- 4)
12
Show channel at startup
Click to activate or deactivate the sensor’s internal LED
identification flash.
13
PI Configurator title
Displays current software version.
14
Serial number
Displays the sensor’s serial number. This parameter is
not available for PS sensors.
15
Dialogue box function buttons Standard operating system functionality.
16
Communication port setup
Click to select which COM port you use to
communicate with the sensor.
17
Language
Click to change language.
18
Help
Click to open on--line help.
19
Factory default
Click to configure the sensor with the corresponding
factory default settings.
20
Indicator lamp
Indicates sensor interrogation.
21
Quit
Close the PI Configurator utility.
