Simrad PI44
246
850-165085 / Rev.B
Factory Default
This button is used to restore a sensor’s factory default values,
according to the type of sensor currently interfaced.
Factory default settings include:
•
Sensor Communication Channel
•
LED control
•
Ping control
•
Data Update rate
•
Remote
•
Show channel with LED flash at start up
Operation
To operate, click the
Factory Default
button to select the
original factory default settings. Then, click the
Configure
Sensor
button to program the interfaced sensor with the original
factory default settings. Finally, check that the message field is
updated with the factory default settings, and that the message
Success!!
is displayed at the bottom as confirmation that the
command was executed.
