Simrad PI44
242
850-165085 / Rev.B
Communication Port Setup
This button opens the
Com Port Setup
dialogue. The integrated
slider bar is used to designate which COM port (COM1 to
COM8) the programming cable is plugged into.
COM1
is the
factory default setting and recommended parameter.
Operation
To operate, click the
Communication Port Setup
button to
open the
Com Port Setup
dialogue box. Click on the desired
port, or use the slider bar to select. Click
OK
to save and exit.
If the chosen COM port is unavailable on the computer, a
corresponding message will inform you about this.
