References
183
850-165085 / Rev.B
Factory presets
This function allows you to restore the PI44 parameters to the
default settings chosen by Simrad.
MENU
Exit
(CD11109F)
Factory presets:
Return to SimNet/NMEA presets
Return to SOUNDER presets
Return to PI FUNCTION presets
Return to all factory presets
Show test display
1
2
3
CLR
0
To access the presets, press the
Menu
key, and select
Setup
(4).
On the submenu, select
Factory settings
. Once accessed, you
have the following choices:
(1):
Restore the SimNet/NMEA factory presets. This will only
restore the interface parameters you have selected on the PI44.
Any settings you have made for echo sounder and sensor
operation will not be affected.
(2):
Restore the echo sounder factory presets. This will only
affect the parameters related to echo sounder operation.
(3):
Restore the PI44 factory presets. This will only affect the
parameters you have made concerning sensor selection and
setup. Sensor setup will not be affected by this reset, but the
Demo
mode will be switched off.
(CLR):
This will clear ALL current parameters and replace
them with the factory presets.
Caution:
If you choose CLR to return to all factory presets, you
will need to redefine every single parameter you have
made on the PI44. This includes all echo sounder
settings, sensor selections and setup, system interfaces
and alarms.
(0):
This option will open a test display. This display is only
provided for software debugging and maintenance use, and it
will not give you any useful information. To close the test
display, press the
MENU
button.
Related topics
→
How to restore default settings, page 101
