Simrad PI44
80
850-165085 / Rev.B
How to view echo sounder data
When you have chosen the Graphic display presentation, you
can choose to superimpose the information from the echo
sounder. This feature allows you to see where your sensors are
located in relation to the bottom and fish echoes. Note that this
feature will only work if you have mounted an echo sounder
transducer to the PI44.
1
Make sure that a Graphic display presentation is active.
2
Press the
ADJ
button to open the
Graphic setup
dialogue.
3
Locate the setting
Superimpose echo sounder
, and set the
option to ON.
4
Press the
ENT
button to save the setting and close the
dialogue.
Related topics
→
Graphic setup, page 184
