Simrad PI44
182
850-165085 / Rev.B
Restart of AUTO pulse/power
: If you have set the transmit
power and pulse length parameters to
Auto
, the echo sounder
will automatically restart the parameters at fixed intervals to
ensure correct settings. By means of this parameter, you can
control the intervals. In most cases, leave this setting to 20
seconds, which is the default value.
Echo sampling
: Using this function, you can select if the
automatic ping rate shall be defined by the current depth or the
current range.
Demo mode
: This parameter allows you to run the echo sounder
in a “demonstration” mode. When this mode is enabled, the
echo sounder will automatically use a “demo transducer” to
avoid damage to the output circuitry.
Related topics
→
Echo sounder display, page 50
→
Echo presentation setup, page 177
