Simplex 4100-S1, Programming Manual

Page: 5 / 106

Document: LT0400 4100U-S1 Programming Guide
Issue 1.4 15 December 2010 Page v
6.3.6 4090-9118 RELAY IAM WITH T-SENSE INPUT 6-4
6.3.7 4090-9119 RELAY IAM WITH UNSUPERVISED INPUT 6-5
6.3.8 4090-9120AU 6 POINT I/O MODULE (4 INPUTS, 2 RELAY OUTPUTS) 6-5
6.3.9 4090-9116 ADDRESSABLE IDNET ISOLATOR 6-6
6.3.10 4090-9117AU ADDRESSABLE IDNET POWER ISOLATOR 6-6
6.4 IDNET DEVICES TYPICAL APPLICATIONS
6-7
7 ADDING ZONE DISPLAYS
7-1
7.1 GENERAL
7-2
7.2 ZONE CONTROL AND LED MODULES
7-2
7.3 HARDWARE CONFIGURATION MODIFICATION
7-2
7.4 MODIFY THE CUSTOM CONTROL EQUATIONS FOR THE ZONES
7-6
8 ADDING EXPANSION MODULES
8-1
8.1 GENERAL
8-2
8.2 ADDING 4100-3101 IDNET LOOP CARD
8-2
8.3 ADDING 4100-4321 LEGACY SIGNAL CARD
8-5
8.4 ADDING 4100-5004 8 POINT MONITOR CARD.
8-7
8.5 ADDING 4100-3003 8 AUX RELAY CARD.
8-8
8.6 ADDING 4100-0302/1290 24 POINT GRAPHIC INTERFACE.
8-9
8.7 ADDING LEGACY CARD
– 4100-0113 RS-232/2120 INTERFACE MODULE 8-10
8.7.1 TYPICAL PRINTER CONFIGURATION: 8-11
9 CUSTOM CONTROL
9-1
9.1 GENERAL
9-2
9.2 CUSTOM CONTROL SYNTAX
9-2
9.3 CREATING A NEW EQUATION
9-4
9.3.1 SELECT USER PROGRAM 9-4
9.3.2 ADD INPUT STATEMENTS 9-5
9.3.3 ADD OUTPUT STATEMENTS 9-6
9.3.4 OUTPUT STATEMENTS: HOLD VS. TRACK 9-7
10 AS1668 FAN CONTROLS
10-1
10.1 TYPICAL ARRANGEMENT FOR AS1668 FAN CONTROL
10-2
10.2 AS1668 FAN CONTROL FLOWS
10-3
10.3 AS1668 FAN CONTROL STATE TABLE
10-5
10.4 AS1668 FAN CONTROL CARD PROGRAMMING
10-6
10.4.1 SWITCH CONFIGURATION 10-6
10.4.2 LED CONFIGURATION 10-7
10.4.3 POINT EDITING 10-8
10.5 AS1668 CUSTOM CONTROL EQUATIONS
10-9
10.5.1 FAN FAULT AND S/A RESTART DELAYS-STARTUP 10-9
10.5.2 SET UP REGISTER 8 10-10
10.5.3 S/A DETECTOR ISOLATE 10-10
10.5.4 S/A DETECTOR DE-ISOLATE 10-10
10.5.5 S/A DETECTOR ACTIVE 10-11
10.5.6 TRIGGER FAN ON 10-11
10.5.7 TRIGGER FAN OFF 10-11
10.5.8 FAN FAULT CONDITIONS 10-12