Mini Air Sander
672976
5
silverlinetools.com
Dust and Fume Hazards
a) Dust and fumes generated when using this tool can cause ill health (for
example cancer, birth defects, asthma and/or dermatitis); risk assessment and
implementation of appropriate controls for these hazards are essential
b) Risk assessment should include dust created by the use of the
tool and the potential for disturbing existing dust
c) Direct the exhaust so as to minimise disturbance of dust in a dust-filled environment
d) Where dust or fumes are created, the priority should be to control them at the point of emission
e) Select, maintain and replace the consumable/inserted tool as recommended in the
instruction handbook, to prevent an unnecessary increase in dust or fumes
f) Use respiratory protection in accordance with employer's instructions
and as required by occupational health and safety regulations
Noise Hazards
a) Exposure to high noise levels can cause permanent, disabling hearing loss and other
problems, such as tinnitus (ringing, buzzing, whistling or humming in the ears). Therefore,
risk assessment and implementation of appropriate controls for these hazards are essential
b) Appropriate controls to reduce the risk can include actions such as
damping materials to prevent workpieces from ‘ringing’
c) Use hearing protection in accordance with employer's instructions and
as required by occupational health and safety regulations
d) Operate and maintain this tool as recommended in the instruction
handbook, to prevent an unnecessary increase in the noise level
e) Select, maintain and replace the consumable/inserted tool as recommended in
the instruction handbook, to prevent an unnecessary increase in noise
f) If the tool has a silencer, always ensure it is in place and in good
working order when the tool is being operated
Vibration Hazards
a) Exposure to vibration can cause disabling damage to the
nerves and blood supply of the hands and arms
b) Wear warm clothing when working in cold conditions and keep your hands warm and dry
c) If you experience numbness, tingling, pain or whitening of the skin in your fingers or
hands, stop using the machine, inform your employer and consult a physician
d) Operate and maintain the sander or polisher as recommended in the instruction
handbook, to prevent an unnecessary increase in vibration levels
e) Hold the tool with a light but safe grip, taking account of the required hand
reaction forces, because the risk from vibration is generally greater when the grip
force is higherAdditional Safety Instructions for Pneumatic Power Tools
Additional Safety Instructions
for Pneumatic Power Tools
Air under pressure can cause severe injury:
• Always shut off air supply, drain hose of air pressure and disconnect tool from air
supply when not in use, before changing accessories or when making repairs
• Never direct air at yourself or anyone else
• Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings
• Whenever universal twist couplings (claw couplings) are used, lock pins
should be installed and whipcheck safety cables should be used to safeguard
against possible hose-to-tool or hose-to-hose connection failure
• Do not exceed the maximum air pressure stated on the tool
• Never carry an air tool by the hose
Sanding Tool Safety
WARNING!
• Use clamps or another practical way to secure the workpiece to a stable platform.
Holding
the workpiece by hand or against the body makes it unstable and may lead to loss of control.
a.
ALWAYS wear appropriate protective equipment, including a dust
mask with a minimum FFP2 rating, eye protection and ear defenders
b.
Ensure all people in the vicinity of the work area are also
equipped with suitable personal protective equipment
c.
Take special care when sanding some woods (such as beech, oak, mahogany
and teak),
as the dust produced is toxic and can cause extreme reactions
d.
NEVER use to process any materials containing asbestos.
Consult a qualified
professional, if you are uncertain whether an object contains asbestos
e.
DO NOT sand magnesium or alloys containing a high percentage of magnesium
f.
Be aware of paint finishes or treatments that may have been applied to the material that
is being sanded. Many treatments can
create dust that is toxic, or otherwise harmful.
If working on a building constructed
prior to 1960, there is an increased chance of encountering lead-based paints
General Safety
a) For multiple hazards, read and understand the safety instructions before
installing, operating, repairing, maintaining, changing accessories on, or
working near this tool. Failure to do so can result in serious bodily injury
b) Only qualified and trained operators should install, adjust, or use this tool
c) Do not modify this tool. Modifications can reduce the effectiveness
of safety measures and increase the risks to the operator
d) Do not discard the safety instructions; give them to the operator
e) Do not use this tool if it has been damaged
f) Tools shall be inspected periodically to verify that the ratings and markings required
by this part of ISO 11148 are legibly marked on the tool. The employer/user should
contact the manufacturer to obtain replacement marking labels when necessary
WARNING:
This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they have
been given supervision or instruction concerning use of the appliance by a person responsible
for their safety. Children must be supervised to ensure that they do not play with the appliance.
Projectile Hazards
a) Be aware that failure of the workpiece or accessories, or even of the
inserted tool itself, can generate high-velocity projectiles
b) Always wear impact-resistant eye protection during operation of this tool.
The grade of protection required should be assessed for each use
c) For overhead work, wear a safety helmet
d) The risks to others should also be assessed at this time
e) Ensure that the workpiece is securely fixed
Entanglement Hazards
• Choking, scalping and/or lacerations can occur if loose clothing, personal jewellery,
neck wear, hair or gloves are not kept away from the tool and its accessories
Operating Hazards
a) Use of the tool can expose the operator’s hands to hazards, including cuts, abrasions and heat
b) Wear suitable gloves to protect hands
c) Operators and maintenance personnel should be physically able
to handle the bulk, weight and power of the tool
d) Hold the tool correctly; be ready to counteract normal or sudden
movements and have both hands available
e) Maintain a balanced body position and secure footing
f) Release the start-and-stop device in the case of an interruption of the energy supply
g) Use only lubricants recommended by the manufacturer
h) Personal protective safety glasses should be used; suitable
gloves and protective clothing are recommended
i) Avoid direct contact with moving parts in order to prevent
pinching or cutting of hands or other body parts
j) Wear suitable gloves to protect hands
k) There is a risk of electrostatic discharge if used on plastic and other non-conductive materials
Repetitive Motions Hazards
a)When using this tool to perform work-related activities, the operator can
experience discomfort in the hands, arms, shoulders, neck or other parts of the body
b)While using this tool, the operator should adopt a comfortable posture whilst maintaining
secure footing and avoiding awkward or off-balance postures. The operator should
change posture during extended tasks; this can help avoid discomfort and fatigue
c)If the operator experiences symptoms such as persistent or recurring discomfort, pain, throbbing,
aching, tingling, numbness, burning sensations or stiffness, these warning signs should not be
ignored. The operator should inform the employer and consult a qualified health professional
Accessory Hazards
a) Disconnect the tool from the energy supply before fitting
or changing the inserted tool or accessory
b) Avoid direct contact with the inserted tool during and after use, as it can be hot or sharp
c) Use only sizes and types of accessories and consumables that are recommended by the
manufacturer of this tool; do not use other types or sizes of accessories or consumables
Workplace Hazards
a) Slips, trips and falls are major causes of workplace injury. Be aware of
slippery surfaces caused by use of the tool and also of trip
hazards caused by the air line or hydraulic hose
b) This tool is not intended for use in potentially explosive atmospheres
and is not insulated against contact with electric power
672976_Z1MANPRO1.indd 5
18/01/2017 09:34
