background image

www.silverlinetools.com

7

900W Electric Hoist

442463

Before Use

WARNING

: Ensure the tool is disconnected from the power supply 

before attaching or changing any accessories, or making any 
adjustments.

Hoist installation

WARNING

: DO NOT attempt to install this hoist single-handedly. 

Correct and safe installation requires more than one person. 

1.   Locate a suitable installation position for the hoist

Note

: The hoist is designed to be installed on a beam of at least 43mm in 

diameter with a wall thickness of at least 3mm. Ensure the beam is capable 
of supporting loads twice the maximum load capacity of the hoist.
2.   Lift the hoist up to the beam and align the Mounting Brackets (8) with 

the threaded holes on the top of the Motor Cover (7)

3.   Fasten the Mounting Brackets to the Motor Cover securely, using the 

Bracket Fasteners (9)

Attaching the return pulley

1.   Mount the Return Pulley (14) by removing the bolts and the R-Clip 

securing the Return Pulley Hook (15)

2.   Feed the cable around the roller of the return pulley and attach the main 

Lifting Hook (16) to the Hook Holder (6) on the Motor Cover (7) - take 
care not to lose the bushes securing the Return Pulley Hook (15)

3.   Re-align the Return Pulley Hook and replace the bolts and R-Clip 

NOTE

: Ensure the Return Pulley is correctly mounted. When correctly 

attached the hoist has a lifting capability of 500kg. When using the Lifting 
Hook (16) for lifting, the capacity is reduced to 250kg. The lifting capacity is 
printed on the side of each hook.

Operation

WARNING

: ALWAYS wear eye protection, adequate respiratory and 

hearing protection, as well as suitable gloves, when working with this 
tool.

•  Once plugged into the mains power source, the hoist will be ready for 

operation

•  Never move the Operating Switch (11) directly between.     The switch 

must be moved into the central (off) position between each up or down 
operation

•  If the hoist is unable to lift the load, stop immediately to prevent it being 

overloaded

Loading the Hoist

•  Before loading, ensure the load is placed directly below the hoist. Failure 

to do so could result in the load swinging freely once elevated

•  Ensure that the load is free to move and is not restricted by anything. If 

the load is restricted, this will cause the hoist to overload and potentially 
cause severe damage. This may also invalidate the warranty

•  The load must be firmly and securely attached to the Lifting Hook (16) 

of the hoist

•  If using a cargo sling to aid in the lifting of the load: ensure the sling is 

sufficiently supporting the load, and the load is properly centred in the 
sling

NOTE

: Ensure that the operating switch is in the off position so that the hoist 

will not attempt to lift the load whilst being connected.

Lifting the Load

1.   When the load is correctly attached, remove the cable slack slowly by    

moving the Operating Switch (11) into the   position

2.   When the slack has been removed, ensure there are no persons within 

a 5m radius of the load being lifted

3.   Press the operating switch into the   to lift the load to its required 

position

NOTE

: Be aware of the maximum lifting capacities and height limitations 

stated in the specifications.
•  When the hoist reaches its height limitation it will automatically switch off

Lowering the Load

1.   Before attempting to lift the load, make sure the surface the load is 

to be lowered onto is capable of supporting the load, and that it is 
sufficiently stable and ready to be loaded

2.   Lower the load by pressing the Operating Switch (11) into the position 
3.   Gently lower the load ensuring that the load stabilises
4.   Lower the Lifting Hook (16) an extra 30cm to ensure there is enough 

cable slack to disconnect the loading hook and then lift the hook clear 
of the load

NOTE

: When lifting the hook clear, ensure the cable winds onto the spool 

correctly and does not cross over itself.

WARNING

: If at any point during the hoist's operation someone enters  the 

operating area or the load becomes unstable, press the Emergency Stop 
Button (10) immediately. To release the Emergency Stop Button, rotate it 
clockwise.

Accessories

•  A range of accessories and consumables, including Hoist Support Arm 

(407455), 1m Cargo Sling 1 Tonne (633720), 2m Cargo Sling 1 Tonne 
(868705), Safety Hard Hat (306429), and Expert Rigger Gloves (633501), 
is available from your Silverline stockist. Spare parts can be obtained 
from toolsparesonline.com

Maintenance

WARNING

: ALWAYS disconnect from the power supply before 

carrying out any inspection, maintenance or cleaning.

General inspection 

•  Regularly check that all the fixing screws are tight
•  Inspect the supply cord of the tool, prior to each use, for damage or wear. 

Repairs should be carried out by an authorised Silverline service centre. 
This advice also applies to extension cords used with this tool

Cleaning 

•  Keep your tool clean at all times. Dirt and dust will cause internal parts 

to wear quickly, and shorten the machine’s service life. Clean the body of 
your machine with a soft brush, or dry cloth. If available, use clean, dry, 
compressed air to blow through the ventilation holes

•  Clean the tool casing with a soft damp cloth using a mild detergent. Do 

not use alcohol, petrol or strong cleaning agents

•  Never use caustic agents to clean plastic parts

Lubrication

•  Slightly lubricate all moving parts at regular intervals with a suitable 

spray lubricant

Brushes

•  Over time the carbon brushes inside the motor may become worn
•  Excessively worn brushes may cause loss of power, intermittent failure, 

or visible sparking

•  If you suspect that the brushes may be worn, have them replaced at an 

authorised Silverline service centre

Storage

•  Store this tool carefully in a secure, dry place out of the reach of children

442463_Z1MANPRO1.indd   7

06/12/2016   12:33

Summary of Contents for 442463









































Reviews: