
12 GB
Note:
You can find the nutritional values of foods on
their individual packaging or in specialist literature.
Switch on the product by pressing the button
ON / OFF
6
. The LC display
2
will show all
displays for approx. 2 seconds.
Press the button MR
4
and button UNIT
7
simultaneously for about 2 seconds until “CODE
800” flashes in the food code display
13
.
Enter a code between 800 and 999 which you
wish to save the nutritional and energy values for
a new food by pressing the number buttons
3
.
Five nutritional and energy values are needed to
set:
PROT (protein) -> FAT (fat) -> CARB (carbohydrates)
-> KCAL (kilocalories) -> CHOL (cholesterol)
Then, press the button MR
4
. The food code dis-
play
13
is now displayed permanently and PROT
flashes in the nutritional and energy display
11
.
Enter the value for the protein using the number
buttons
3
.
Press the button MR
4
again to enter next setting.
Repeat previous step until all nutritional and en-
ergy values are saved.
After entered all the corresponding nutritional and
energy values, press the button MR
4
to complete
entry of the nutritional and energy values. This
new food will be ready to use.
Note:
The following maximum values can be
entered:
PROT (protein):
500 g
FAT
(fat):
500
g
CARB (carbohydrates):
500 g
KCAL (kilocalories):
5000
CHOL (cholesterol):
5000 mg
Note:
“E” will be showed if the value you enter
exceed the corresponding maximum values.
Note:
You can also overwrite one of your previ-
ously saved codes by simply reassigning the code
number and saving the new nutritional and energy
values under this code.
Switching off
Pressing the button ON / OFF
6
will off the product.
If no movement is detected on the weighing surface
1
for 1 minute and no button is pressed, the product
will automatically switch off.
Troubleshooting
= Fault
= Cause
= Solution
=
0-Ld
= The product is overloaded.
= Remove the overload.
=
= The batteries are too weak to weigh. You cannot
operate the product.
= Replace the batteries (see section “Replacing the
batteries”).
Note:
The product contains sensitive electronic compo-
nents. For this reason it is possible that it can be disrupted
by radio transmitting equipment in the immediate vicinity.
If the LC display
2
indicates a problem, move such
objects away from it.
Electrostatic discharges can lead to malfunctions. In
cases of the product failing to work, remove the
batteries for a short while and then replace them.