Operating manual - English
REKORD AY
Copyright Silca 2019
19
8.5
Replacing the fuses
ATTENTION: turn off the machine and disconnect the supply wire.
1) Unplug the power cable from the key-cutting machine socket.
2) Turn the key-cutting machine round so as to reach the fuse housing on the back.
3) Remove the fuses box placed below the key-cutting machine socket (P).
4) Replace the fuses (U) (fig. 26).
5) Close the fuses box and connect the power cable.
ATTENTION: fuses must always be replaced with others of the same type (rapid) and with the same Amps (4
Amps for 230V).
Fig. 26
8.6
Access to the lower part
ATTENTION: turn off the machine and disconnect the supply wire.
1) Detach the wire from the key-cutting machine socket.
2) Remove the double box (tool holder/swarf tray) (C2) and (C1).
3) Turn the machine over onto its back.
4) Loosen the 6 screws (Y) to remove the bottom grate.
Fig. 27
fuse box
U
P
Y
