REKORD AY
Operating manual - English
4
Copyright Silca 2019
GENERAL INTRODUCTIONS
The REKORD AY key-cutting machine has been designed according to the specifications of the
Machine Directives. From the design stage risks for the operator have been eliminated in all areas:
transport, key-cutting, regulation and maintenance.
Other risks have been eliminated by the use of protective devices for the operator.
The protective devices used are designed not to provoke further risks and, above all, they cannot be
ignored unless deliberately cut out. They do not hinder visibility of the work area.
A special adhesive label is attached to the machine warning the operator to use goggles during the
cutting operations, and this is strongly recommended in this manual.
The material used in the manufacture of this machine and the components employed during use of the
machine are not dangerous and their use complies with standards.
Use
REKORD AY is a key-cutting machine and must be installed and used according to the rules and specifi
cations established by the manufacturer.
The key-cutting machine must be used only by skilled personnel (professional use).
The key-cutting machine is designed for use on business or industrial premises (e.g. hardware shops,
key cutting centers, etc...). This equipment should not be used where children may be present.
Any other use different from that indicated in this manual will cause the forfeiture of all customers’ rights
to make claims on Silca S.p.A. and may be an unknown source of hazard for the operator or third
parties..
Negligence in the use of the machine or failure on the part of the operator to observe the instructions
given in this manual are not covered by the guarantee and the manufacturer declines all responsibility
in such cases.
It is therefore indispensable to read the operating manual carefully in order to make the best use
of the REKORD AY and benefit from its potential.
Instructions manual
The instructions manual provided with the machine is essential to its proper use and to carry out the
necessary maintenance.
We therefore recommend protecting the manual from damage in a safe sheltered place, easily to hand
for quick consultation.
Further Risks
There are further risks arising from the use of the machine (see chap. 3.1, page 8).
Protection and safety precautions for the operator
The REKORD AY key-cutting machine is built entirely to standards. The operations for which it has been
designed are easily carried out at no risk to the operator.
The adoption of general safety precautions (wearing protective goggles) and observation of the
instructions provided by the manufacturer in this manual eliminate all human error, unless deliberate.
The REKORD AY key-cutting machine is designed with features which make it completely safe in all its
parts.
•
Power supply
The key-cutting machine is powered by electricity supplied through a separable earthed plug.
•
Start-up
The machine is started up:
-
Activating the safety main switch on the right-hand side of the machine.
-
Activating the motor on switch the left-hand side.
•
Maintenance
The operations to regulate, service, repair and clean the machine have been devised in the simplest and
safest way possible. There is no danger of removable parts being re-placed wrongly or unsafely.
•
Machine Identification
The REKORD AY key-cutting machine is provided with an identification label which shows the serial
number (fig. 2).
Fig. 2
(*) see chap. 9 "DISPOSAL", page 24.
