Operating manual - English
REKORD AY
Copyright Silca 2019
11
5.5
Separate parts
The separately packed parts must be installed on the REKORD AY key-cutting machine by the
purchaser, as follows:
Connection wire
Connect the key-cutting machine power
cable to the electricity mains (fig. 9).
Fig. 9
Carriage lever handle
Screw the handle (D) onto the carriage
lever (fig. 10).
Fig. 10
5.6
Description of work station
The key-cutting machine needs only one operator, who has the following controls at his/her disposal:
-
Switch on the lamp by activating the main switch (O) located on the right-hand side of the machine.
-
The motor on switch (N), located on the left-hand side of the machine has a warning light to show
that the key-cutting machine is live.
-
Carriage handle lever (D).
Fig. 11
power
cable
electricity supply
D
D
O
N
