6-49
FS '!' n
Set Kanji Print Mode
Code
1CH 21H n
Function Sets a print mode for 2-byte characters.
Each bit of n is used as follows:
Bit Function
n=0 n=1
0
Printing direction selection
Horizontal writing
Vertical writing
1 Undefined
-
-
2 Double-width
Canceled
Set
3 Double
height
Canceled
Set
4
Kanji quarter size character
Canceled
Set
5
Kanji quarter size character position
Subscript
Superscript
6 Undefined
-
-
7
Under line
Canceled
Set
The underline is attached to all character widths, including right- and left-side character spacing.
However, it is not attached to the characters skipped by HT or other commands, or the
characters rotated by 90°.
The underline width is specified by FS '-' regardless of the character size. When the underline
width is not specified by FS '-', default width is set as 1-dot underline.
This command does not affect 1-byte character, however the only double-width mode is valid for
1-byte characters.
If the print mode can also be selected or canceled by another command, the most recently
processed command is effective.
The Kanji quarter size character can be selected or canceled in Kanji mode only. Bit 4 is ignored
in non-Kanji mode.
Default n=0
Summary of Contents for DPU-S245
