SII DPU-S245, Technical Reference

Page: 127 / 170

6-82
'V' {d1 d2 ••• dk}
NAME
: Sets routine image (Same function as DC3 'V' {DATA})
FUNCTION : Stores image data in the selected ruled line buffer.
'P' n
NAME : Prints routine dot line (parameter print)
n=Repetitive dot lines (0

n

255)
FUNCTION : Prints data in the line buffer. After printing data in the line buffer,
it prints n dot lines of the selected ruled line. If n=0, data in the line buffer only
is printed.
'$' nl nh
NAME
: Sets parameter absolute position (Same function as ESC '$' nl nh)
(nl) =Print start point of parameter data
FUNCTION : Sets the print start point to a position nhnl dots to the right from the left margin.
'S' n
NAME : Sets parameter
n=Parameter data number
FUNCTION : Outputs parameter data with the parameter number specified by n to
the line buffer.
If a registered routine format number is specified, the old routine format is deleted, the area is
released, and a new routine format is registered.
10 bytes of memory control data is added to each routine data. Therefore, (all routine format
data 10) bytes of memory are used.
If the remaining memory capacity is less than (all routine format data 10) bytes, all
data is ignored. (all routine format data 10) bytes must be 65535 bytes or less.
Data exceeding 65535 bytes is processed as normal data.
Specify dh=dl=0 to erase a routine format from memory.
Data with the routine format number specified by n is deleted.