6-45
6.5.12 Kanji Character Definition Commands
FS '2' c1 c2 {DATA}
Define User-defined Character
Code
1CH 32H c1 c2 {d1 d2•••dk}
Function Defines a Kanji User-defined character pattern for the character code specified by c1 and c2.
c1 and c2 indicate a Kanji code for the User-defined character to be defined.
c1 indicates the first byte, and c2, the second byte.
c1 and c2 depend on selected kanji code system or mounted font set, refer to 6.3 CHARACTER
CODES for details.
If c1 or c2 is out of range, the range is ignored and the following data will be processed as
normal data.
Since 24-dot User-defined characters and 16-dot User-defined characters are registered in
different areas, up to 94 characters of each type can be defined at the same time.
Whether a 24-dot or 16-dot User-defined character is registered according to the font selected
when this command is input.
The number of bytes (k) of the pattern is as follows:
24-dot: k = 3
24 = 72 bytes
16-dot: k = 2
16 = 32 bytes
d indicates font data. 8 vertical dots of font data must be input as 1 byte.
Default Undefined
•24-dot
font
•16-dot
font
2
1
3
3
5
4
4
6
71
70
72
LSB
MSB
24 dots
24 dots
2
1
31
32
LSB
MSB
16 dots
16 dots
2
Summary of Contents for DPU-S245
