2-5
(1) Example of use of the marked paper roll
An examples of use of the marked paper roll shown Figure 2-2 is explained as below.
(a) Set the function setting of Paper Mode to “Mark Roll Paper”.
(b) Insert the thermal paper.
(c) Set the page length as the length from the beginning of the current mark to the beginning of the
next mark.
(d) Set the skip amount (non-printing area) in order to avoid printing at cutting position.
(e) Print data within the printable area.
(f) Use Form Feed command to find the beginning of the next mark.
The print start position after the beginning of the next mark is placed at position 'a', and the paper
cut position is placed at 'b' as shown in Figure 2-2.
Repeat steps (e) to (f).
(NOTE) When Mark Position Correct of SWDIP 4-5 is set as Enable, the printer operates
paper feeding to backward 5 mm just before printing process after placing print
start position.
If this function set as Enable, use the marked paper roll with 40mm or longer
length of mark distance to prevent paper jamming from feeding paper backward.
Summary of Contents for DPU-S245
