SignaMax 065-7700, User Manual

Page: 97 / 199

Hardened Managed PoE Ethernet Switch
User’s Manual 96
IGMP Snooping
1. IGMP mode: Click “IGMP mode” drop-down menu from “IGMP mode”
drop-down list to choose “Disable”, “Passive”, or “querier” for the switch.
Disable: Disable IGMP on the switch. Passive: The switch with only
multicast-data-forwarding capability. Querier: The switch acts as the
querier for the network. There is only one querier on a network at any
time.
2. Update Setting: Click “Update Setting” button when you finished IGMP
mode settings.
3. VLAN ID: Click “VLAN ID” drop-down menu from “VLAN ID” drop-down
list to choose the VLAN under configuration for the switch.
4. IGMP version: Click “IGMP version” drop-down menu from “IGMP
version” drop-down list to choose “1”, “2”, or “3” for the switch.
5. Fast-leave: Click “fast-leave” drop-down menu from “fast-leave”
drop-down list to choose “Enable” or “Disable” for the switch. Enable this
function will allow members of a multicast group to leave the group
immediately when an IGMP Leave Report Packet is received by the
Switch.
IGMP querier:
1.
Query-interval: Click in the “query-interval” textbox and specify a new
number from 1 ~ 18000. The query-interval field is used to set the time
(in seconds) between transmitting IGMP queries. Entries between 1 and