SignaMax 065-7700, User Manual

Page: 6 / 199

Hardened Managed PoE Ethernet Switch
User’s Manual 5
Console Configuration

Connect to the switch console:
Connect the DB9 straight cable to the RS-232 serial port of the device
and the RS-232 serial port of the terminal or computer running the
terminal emulation application. Direct access to the administration
console is achieved by directly connecting a terminal or a PC equipped
with a terminal-emulation program (such as HyperTerminal) to the
switch console port.

Configuration settings of the terminal-emulation program:
Baud rate: 115,200bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none

Press the “Enter” key. The Command Line Interface (CLI) screen should
appear as below:

Logon to Exec Mode (View Mode):
At the “switch_a login: ” prompt just type in “root” and press <Enter> to
logon to Exec Mode (or View Mode). And the “switch_a>” prompt will
show on the screen.